MC6 as a pressure calibrator

The MC6 can be made with up to four internal high-accuracy pressure modules and it can also be used with interchangeable external pressure modules. Thanks to the modular design, new modules can be retrofitted. Low pressure modules are provided with built-in relief valves for over pressure protection. It can also measure gauge, vacuum and absolute pressure and can communicate with an automatic pressure controller for fully automated pressure calibration.

 

MC4 as a pressure calibrator

The MC4 has room for two internal pressure modules (a gauge module + barometric module). It can also be used with external interchangeable pressure modules. The MC4 can measure gauge, vacuum and absolute pressure.

 

MC2 as a pressure calibrator

The MC2 has room for two internal pressure modules (a gauge module + barometric module). It can also be used with external interchangeable pressure modules. MC2 can measure gauge, vacuum and absolute pressure.

 

MC5-IS as a pressure calibrator

The MC5-IS is an intrinsically safe calibrator that has room for three internal pressure modules. It can also be used with the intrinsically safe external pressure modules. The low pressure modules have built-in relief valves for over pressure protection. The MC5-IS can measure gauge, vacuum and absolute pressure.

 

MC2-IS as a pressure calibrator

The MC2-IS is an intrinsically safe calibrator and has room for one internal barometric pressure module. It can be used with the intrinsically safe external pressure modules. The MC2-IS can measure gauge, vacuum and absolute pressure.

 

External pressure modules (EXT)

External pressure measurement modules are interchangeable with all Beamex MC calibrators. Various pressure ranges are available. The lowest pressure ranges are equipped with relief valves for over pressure protection.

 

Automatic pressure controller POC8

The POC8 is an automatic pressure controller making pressure calibrations very efficient and easy to perform.
A variety of pressure ranges are available, from vacuum up to 210 bar (3045 psi).

You can use the POC8 as a stand-alone pressure controller or as part of the Beamex integrated calibration solution. With the panel mounting kit, the POC8 can be installed in the Beamex MCS200 calibration bench for a professional workshop solution.

 

PG pumps for pressure calibration

The PG calibration pumps are handy tools to generate pressure during calibration. There are different models for different pressure ranges, from low pressure pumps to high pressure pumps.

 

MCS200 for pressure calibration

The MCS200 calibration bench can be designed with many different modules for pressure calibration. This includes manual and automatic pressure generation modules and pressure measurement modules.

 

MC6 Workstation for pressure calibration

The MC6 Workstation is a bench model of the MC6 calibrator. You can install up to 10 high-accuracy pressure modules simultaneously to the bench which is connected to the MC6 Workstation. Low pressure modules are provided with built-in relief valves. External pressure modules are also supported.

 
How can we help?
Close