It provides a fast and effortless way to generate pressure and vacuum for various pressure calibration applications.
Simply use the backlit coarse and fine adjustment buttons to generate the required pressure or vacuum.
Flexibility – use with any calibrator
The ePG pressure generator can be used with any existing pressure calibrator, so there is no need to purchase a new pressure calibrator.
Just replace your existing manual hand pump with the Beamex ePG and start making your life easier.
Convenience, backed by the powerful battery
The ePG has a powerful field-replaceable rechargeable battery pack with status indication.
The battery has a status check feature, and it provides a long operation time, over a week in normal use, and it can be quickly charged either inside the pump or separately.
The most common service needs can be carried out by the user, so there’s no need to send the pump to Beamex for service.
And even if the pump is sent to service, you can still use your calibrator.
Experience ePG in 3D!
Automate and make it even easier
When the ePG is used together with the Beamex MC6 family of calibrators, it creates a fully automatic documenting pressure calibration system, ensuring calibrations are repeatable, avoiding errors in manual calibration, and saving both time and money.
The CENTRiCAL offers a very ergonomic way to work in a workshop. With the electrically adjusted tabled height, you can set the table to optimum working level. Having all the equipment ergonomically located in the bench improves the work efficiency.
All the relevant modules delivered with CENTRiCAL are calibrated before delivery and come with calibration certificate included. You can start using the bench immediately without any need to have equipment calibrated first.
The MC6 workstation module is the heart of calibrations in the CENTRiCAL bench. It is a documenting calibrator that can also communicate with the Beamex calibration management software enabling a fully paperless calibration process.
Why workshop calibration?
During the commissioning phase, it is easier to calibrate all instruments in workshop before installation.
Workshop conditions enables better accuracy for calibrations.
Workshop offers an easy way for calibration for spare devices and rotational spares.
Convenient environment and safer to work in workshop.
Efficiency, ergonomics, ease of work, and many other practical reasons.
Workshop calibration vs. field calibration? Read this article to learn.
The calibration host module, MC6 Workstation, turns your calibration bench into a documenting calibration solution.
When you use the bench it with Beamex calibration software (Beamex CMX or Beamex LOGiCAL) you have a fully paperless calibration process. You no longer have to write calibration results on paper, perform manual error calculations or manually type results into software.
The whole calibration process is digital and fully paperless, which saves you time and money, improves the quality and reduces the risk of errors.
We help you design your dream bench!
Establishing a calibration workshop is a large project that includes many interrelated tasks. Because of this, it should be run like any major project, with proper project organization.
We can help you in the design of your calibration and test benches to make the dream workshop.
How to build a calibration workshop - Interested to get more detailed info?
Improve the efficiency of your pressure calibrations.
The Beamex POC8 is an automatic pressure controller making pressure calibrations very efficient and easy to perform.
A variety of pressure ranges are available, from vacuum up to 210 bar (3045 psi).
A POC8 can be equipped with 1 or 2 accurate internal pressure measurement ranges and a barometric module.
Integrated calibration system
You can use the POC8 as a stand-alone pressure controller or as part of the Beamex integrated calibration solution.
Using the POC8 together with the Beamex MC6 family calibrators and Beamex CMX calibration management software enables a fully automated and integrated solution for performing, documenting and managing calibrations easily, efficiently and accurately.
Desktop or panel mounted
The POC8 can be used as a desktop model, managed through it’s multilingual color touchscreen user interface.
With the panel mounting kit, the POC8 can be installed in the Beamex CENTRiCAL calibration bench for a professional workshop solution.
Protect your calibration equipment against contamination
Process instruments may contain moisture and dirt. A dirt and moisture trap will capture any dirt and moisture to prevent them from entering the calibration equipment such as pressure controllers, pressure calibrators and pressure hand pumps.
A trap also prevents cross-contamination between devices under test.
The Beamex DMT dirt and moisture trap is available in two versions:
DMT40 for 40 bar / 580 psi
DMT210 for 210 bar / 3045 psi
Included with the Beamex DMT are dedicated low or high pressure connectors and hoses. Also, a stand is included to keep the trap in a vertical position and it also works as a manifold including three pressure ports. The trap is simple to open for emptying and cleaning.
The Beamex DMT trap is made of stainless steel.
Where to buy?
Beamex Oy Ab – Middle East and Africa
29th Floor Shining Towers
Khalidiya, Abu Dhabi
United Arab Emirates
Accuracy meets versatility. You won’t find this calibrator collecting dust on the shelf in your workshop; it is always on the go. Beamex MC5 is the all-in-one documenting multifunction calibrator for calibrating pressure, temperature, electrical and frequency signals. The modular construction of the MC5 provides flexibility for user-specific requirements.
Beamex MC5 was the world’s first Fieldbus calibrator: a combination of a calibrator and a fieldbus configurator in one unit.
Beamex MC5 has been a great multifunction calibrator but the world keeps changing. We have made you a better solution for today's challenges!
The MC5 is a high accuracy calibrator. Each MC5 calibrator was delivered with a traceable, accredited calibration certificate.
Made for tough use
The MC5 has IP65-rated robust casing with integrated impact protectors.
Modularity means versatility
The modular construction of MC5 provides flexibility.
For instance, when the MC5 was still in production, a customer could buy it as a pressure or temperature stand-alone calibrator, and then later expand it into a data-logging, documenting multifunction calibrator.
Communication with calibration software
Using the MC5 together with calibration software provides you with a complete documenting calibration system that produces calibration certificates automatically.
The Beamex smart reference probe contains an integrated memory that stores individual sensor coefficients.
The sensor works as a “plug-and-play” with the Beamex FB series of temperature blocks (R model). The temperature block automatically reads the sensor coefficients from the sensor and makes the necessary adjustments, eliminating the need to enter coefficients manually. The smart reference probe can also be used with the Beamex MB series of temperature blocks (R model), and sensor coefficients can be manually entered via the MB user interface. The smart sensor can also be connected to the Beamex MC6 calibrator.
Excellent long-term stability
The Beamex smart reference probe is a high-quality probe that provides great accuracy and excellent long-term stability.
The Beamex RTS24 is a very easy-to-use high precision simulator for Pt100 resistance thermometers. The RTS24 covers the general operating range for Pt100 thermometers with 24 temperature points within the range -20 °C to +600 °C (-4 °F to +1112 °F). The RTS24 Temperature Simulator provides high stability and accuracy.
Beamex’s POC6 is a quick and accurate pressure controller that makes pressure calibration easy. It can be used as a stand-alone pressure controller or combined with Beamex documenting calibrators and calibration software, creating a fully paperless automated calibration process. The POC6 is available as a panel-mounted version with the Beamex MCS200 workstation or as a portable desk top version.
• Pressure ranges from vacuum up to 100 bar g
• 7” color touch-screen
• Unique control technique
• High precision < 0.015 % FS
• 1 Year Uncertainty < 0.025 % FS
• Control stability < 0.004 % FS
• Fast control
The Beamex MCS200 offers a solution for a large variety of applications, such as calibration of pressure, temperature and electrical signals; electrical tests and measurements; maintenance & testing of single and three-phase motors and other electric devices; soldering and de-soldering, educational use, etc.
The advanced design of the MCS200 table frame and module rack offers easy installation, flexible height, a dual-panel option, 2 benches – 3 legs solution, LED lighting and movable accessories under the tabletop.
The module rack can host a variety of modules including calibration modules, AC & DC power supplies, multi-meters, function generators, oscilloscopes, and more. This makes the MCS200 Workstation ideal for instrument and electrical workshops as well as laboratories.
Electrostatic discharges cause problems to electrical components in repair and production facilities. The MCS200 is a safe choice for areas where sensitive components are handled. The workstation and its accessories are created with an electrically semiconducting coat of paint. For full electrostatic discharge protection, a semiconducting table top, ESD wrist straps, mats, and grounding sets are available.
The MC6 workstation module is the heart of calibrations in the MCS200 bench. It is a documenting calibrator that can also communicate with the Beamex calibration management software enabling a fully paperless calibration process.