Features:

MC5P Host Module Features
Optional features
Multichannel Datalogging
HART®
MC5P Host Module
Electrical and Temperature Module
Pressure Measurement Modules

MC5P host module features:

• Voltage and current measurement
• Pulse counting and frequency measurement
• Current generation
• Switch testing
• 24 V DC loop supply
• Connection for external pressure modules

Optional features:

• HART® communication
• Datalogging
• Communication with pressure controller
• Communication with dry blocks
• Communication with software
• Environmental temperature sensor

back to top

Multichannel datalogging:
The MC5P host module can scan up to 7 datalogging channels for electrical-,temperature-and pressure signals, storing up to 70 000 results. The accompanying software allows storing the results onto the computer hard disk and viewing in graphical form. It also allows data export to spreadsheet programs.

back to top

HART®:
The HART® option includes the 250 ohm resistor needed when the 24 VDC loop supply is used. The functions include both reading the HART® signal, editing parameters as well as sensor trimming for a great number of HART® instruments.

back to top

Calibration Modules - MC5P Host Module
The MC5P calibration host module is, with its large graphical display and membrane keyboard, the master module for temperature, electrical and pressure calibration modules. Apart from communicating with the calibration modules, it also features communication with dry blocks and automatic pressure controllers.

The MC5P can also work as a multichannel datalogger (option), using the other calibration modules.

The MC5P includes an electrical section (E) which hosts the optional HART® modem which allows digital communications with instruments that support the HART® protocol. MC5P automatically includes an internal 250 ohm resistor required for HART® communication when the +24V DC loop supply is used.

back to top

The ET module includes the reference junction (RJ) module, using advanced temperature measurement technology providing very accurate internal cold junction compensation when measuring or simulating thermocouples. The unique design of the RJ module makes it possible to use practically any connector type or bare TC wires.

ET module features:
• RTD measurement / simulation
• Resistance measurement / simulation
• Thermocouple measurement / simulation
• Low voltage measurement / generation
• Reference junction (RJ)
• Frequency generation
• Pulse generation
• Voltage generation
• Current generation

back to top

PM Pressure Measurement Modules
The PM pressure measurement modules incorporate advanced pressure measurement technology resulting in only a few PM modules being required to cover a wide pressure range with excellent uncertainty.

The barometric module PM B measures the ambient barometric pressure. When the barometric module is incorporated in the system, the ranges of all other pressure measurement modules can be displayed both in gauge and absolute pressure.

The read out from PM modules is displayed in the MC5P module.

back to top