|
| etusivu > menestystarinoita
|
||
 |
|
|
|
Menestystarinoita Yli 10 000 yritystä maailmanlaajuisesti hyödyntää Beamexin kalibrointiratkaisuja. Jos haluat tietää tarkemmin miten asiakkaamme ovat kokeneet tuotteidemme käytön hyödylliseksi, tutustu alla oleviin asiakascaseihin tai ota meihin yhteyttä. Tästä pääset lataamaan pdf-tiedostoja alla olevista asiakascaseista.
“The process instruments we are using require high-accuracy calibration and the calibrators have provided us with excellent results.” - Dr. Rahmat Mohsin, Director, Universiti Teknologi Malaysia, Gas Technology Centre (GASTEG), Malaysia "According to suppliers of maintenance systems, we introduced the most effective, automated and validated calibration process known in the pharmaceutical industry." -Anders Ånlind, Calibration Manager at
AstraZeneca Sweden Operations, Sweden "Our focus was to improve our calibration methods and improve efficiency by producing calibration certificates automatically." -Dave Wright, Senior Instrument Technician,
Croda Chemicals Europe Ltd., UK "The capability of the MC5 provides us with opportunities which we did not previously have, and we will be seeking to leverage these capabilities in our never-ending journey to improve the way we do things." -Derek Cross, Site Reliability Engineer, Eli
Lilly and Company Limited, Speke Operations, UK "There is no other calibration system that talks to calibrators as well as Beamex's does." -Richard Salmon, Senior Instrumentation Engineer,
Airbus UK “The time required to calibrate field control devices, and to produce test results, has been reduced by between half or two-thirds compared to older, more conventional methods.” -Hakon Dybwad, Field Service Engineer, New
England Controls, USA "Our opinion, based on years of experience, is that Beamex equipment is highly reliable and accurate." -Mariano Cejalvo, Instrument Manager, Central
Nuclear de Almaraz, Spain "In general, the Beamex calibration system is a major part of the instrument maintenance we do, and we have had other groups from this plant come and see how we have it running." -Tony Trollope, Equipment Team Leader, Instruments,
BlueScope Steel, Australia "I've worked in co-operation with Beamex since it was established." -Kalle Vikman, UPM Kymmene, Finland "We estimate that only few comparable devices (other than Beamex) have gone through such a load test in operating conditions during the construction of a nuclear installation and at the same time observe all legislative (metrological) regulations." -Jan Krška, director of the Temelín
division, I&C Energo, Czech Republic "The fact that we have been able to completely leave out (calibration-related) paperwork in the field is what makes us satisfied." -Juha Elonen, Nestlé Finland, Finland “Beamex equipment was chosen because the MC5 offered the most options as far as module ranges, devices that could be calibrated and put into the database, HART® communications, and database functionality.” Jeff Cason, Senior Instruments and Controls
Technician, Georgia Power’s Plant Yates, USA
|
||
|
Copyright © - Beamex 2006 |
||
